12V183TE93 - Coolant drain Locations - Coolant Pump Removal

• Related Articles

• 2000CR Coolant Pump to HP Fuel Pump driver

  LSB 11-23 Issue 4 contains info and part numbers to determine driver type needed depending on various Coolant Pump and HP Fuel Pump versions and configurations.

• 2000Gx5 coolant pump mount oring - QPE0662010378 - 700429120000

  2000Gx5 coolant pump mount o'ring is typicaly supplied with coolant pump assembly. If pump is removed from whatever reason generaly this o'ring seal maybe OK for reuse if not damaged or perished in anyway however if wanting to replace - below image ...

• MTU 12V183TE93 Raw Water Pump Flow Rate

  Below is the flow rates for the raw water pump on a 12V183TE93Also attached is the complete Technical Sales Document for the 12V183TE94. Additionally the Technical Sales Documentation can be found on the MTU Business Portal TEN Documentation

• 20v4000C22 optional removal or re-purpose of fuel booster pump

  TSD 20-18 available on onedrive explains process for 20v4000C22 fuel booster pump removal if customer desires to. Note this pump could also be re-purposed as an electric servicing priming pump if simple wiring modifications made to existing booster ...

• Coolant for 12V4000 Genset

  Nalco 3477 coolant is approved in A001064 so is OK for a 12V4000G engine. The comment about Light Metals means that in MTU testing the coolant has been found to attack aluminium and other light alloys, therefore if the customer has this in the ...