DDECII programming instructions

• Related Articles

• DDEC III ECM part number options - 02TS3

  Attached lists options for DDEC III / DDEC 3 ecm versions available - note some maybe more specific to S60 with only 6 injector drivers (lower cost) whilst the 8 cyl version would still be suitable etc.. Refer attached for details.

• DDEC Re-programming Uploads to Mainframe

  As part of the DDEC re-programming procedure it is not often known to complete the re-programming a upload of the current calibration to the mainframe is required to ensure the most recent version calibration (customer settable options) is available ...

• DDEC IV ecm supersession change

  Confirmation from DTNA that below changes are available as supersessions for common DDEC IV ecm’s we use. They are like for like and only below differences. 23529309 to 23565215 – typical S4000 23529308 to 23565214 – typical S60 / S2000 Changes made ...

• DDEC Calibration settings - Hitachi EH3500AC3

  Attached is example of standard original supplied DDEC calibration set up for EH3500AC-3 haul truck. Below is summary of original factory supply. MODEL: T1237K33 (12V4000C21) Tier 1 / EO APPL GROUP:   06N04C0781    DESCRIP:  APPL DDEC C&I ELEC DRV ...

• Connecting to DDEC reports with Nexiq USB link II

  Connecting to DDEC Reports using Nexiq USB link II. Due to change of plug pinout from Nexiq 1 (15 pin female) to Nexiq 2 (26 pin male) must use locally developed patch cable 124032A.OTH between the Nexiq II adaptor (green) and the marine specific MIM ...