MTU oil level monitoring, regulating and replenishment level managment system
MTU offers a mechanical optional system that can provided at new engine supply :-
- oil level monitoring only.
- oil level monitoring, regulation and replenishment system.
This version maybe found on many 4000 and 2000 installations including Marine, Defence, C&I, Mining, Rail and Powergen. The attached presentation, although drafted around Marine, provides good insight of the 2 versions and their differences in design and functionality.
NOTE - if the external tank / replenishment version is in use then any servicing must also include replacement of oil within this external tank system as well as engine as oil is circulated between both through operation - following servicing oil levels must be confirmed correct in both engine and external tank prior to restart.
If any questions or queries regarding this system please contact your technical support team via a REV ticket submission to assist.
Related Articles
Oil Level Sensor Calibration OM936 and monitoring
Too high or too low engine oil level can lead to serious damage to the engine. Hence, it is important to check it regularly and maintain with appropriate level. There are mainly two methods to check engine oil level. Oil level measurement using oil ...
MTU Specifications for Liquid Fuels - (Diesel)
MTU specifications for liquid fuels (Diesel) can be found in the Fluids and Lubricants Specifications manual. Section 5. Liquid Fuels has all of the required information needed when evaluating fuel type and quality for MTU engines. Attached is a ...
MTU 12V183TE93 Raw Water Pump Flow Rate
Below is the flow rates for the raw water pump on a 12V183TE93Also attached is the complete Technical Sales Document for the 12V183TE94. Additionally the Technical Sales Documentation can be found on the MTU Business Portal TEN Documentation
TSD 20-08 additional unit release - increased oil level for Komatsu 830E & 930E repower engines
G’day Jim, Following on your official request of Technical support to review suitability of applying TSD 20-08 to current Komatsu repowering fleets I can confirm comparison of key hardware between our current factory engine supplied ...
Oil level increase 16V4000-01 - dipstick
TSD 20-08 available in onedrive provides advice for abaility to increase running oil level for 16v4000-01 engines in Hitachi AC3 installations and possibly others. This another continuous improvement MTU and Penske has worked on to enable some ...