PLD / MR2 / VCU - hardware details where found

• Related Articles

• Off highway application - Mercedes Classic OM Engine - OFF Engine wire harness for ADM/CPC/MR/PLD

  All XENTRY users, Attached is a drawing for an off the engine wire harness for testing of components(ADM/CPC/MR/PLD), programming(ADM/CPC) & XENTRY operation validation for the Mercedes classic OM engine range that utilise the ADM2/3 and CPC4-ECAN ...

• OM / Mercedes / LPR Tiemec terminal and connector parts listing - ADM / PLD-MR

  Attached is factory parts lising deails for terminals and connectors typically used on LPR Legacy OM engines with ADM / PLD-MR.

• OM LPR terminal harness connectors part numbers ACM MCM MR CPC

  Attached is some available reference material to help decipher terminal and connector part numbers and details for OM LPR engines. 

• PLD VOLTAGE INCORRECT - error codes

  If an OM engine is ordered as the incorrect operational voltage to original spec (ie. running at 12v but PLD looking for 24v) itcan create an error code. The only way this can be addressedis by making changes to the calibration via MTU America.Many ...

• Mercedes PLD Parameter change request from 24v to 12v - error code SPN 24578 & SPN 155649

  In this case, the engine was replaced with one from PPS stock with a similar calibration that was altered for us by MTU on the mainframe.When replacing and trying to match an older engine, the use of a newer "V23" PLD controller requires updating of ...