2000CRx2/3/4 high pressure fuel pipe tensions (as at 2017)

• Related Articles

• 4000 HP fuel pump mount O-ring

  Current parts manuals don't list the HP fuel pump mounting O-ring as a separate item and is supplied standard with the fuel pump assemblies and generally reusable if of good condition. If however looking to replace the o-ring the O-ring used on the ...

• 2000 C_S_G / PLD version double skin HP fuel pipe recommendations - drill rigs / mining

  Technical department, and MTU via attached old bulletin have been recommending for years now to promote the use of the “Double Skin HP fuel system” for some very key benefits to the customer –  Less likely for any HP fuel pipe failure to occur - ...

• 16V2000M93 High fuel temp @ idle

  Due to the design of the HP Pump part number X00037861 , the internal leak off fuel inside the pump circulates around in the galleries and heats up.A possible fix for this issue is to use a pipe kit to allow the fuel to return to the inlet side of ...

• HEFF fuel priming instructions

  Attached are instructions to prime a S4000 engine fitted with HEFF and an electric primer.

• 4000-03 fuel system variances and maintenance tips

  TSD 20-12 available on onedrive provides advice and descriptions for the variances of fuel systems that can be provided on the 4000-03 engine range. This also provides beneficial technical tips for maintenance and troubleshooting requirements.