4-20mA Sensor Signal

• The 4-20mA Sensor adjusts the current output signal proportional to the range of the sensor.
• The signal is unaffected by EMI, cable length or corroded pins.
• The 4-20mA signal at the PLC is always the same as that being generated by the sensor, unless the harness is compromised.

• Related Articles

• 2000Gx6 common rail pressure sensor - X00E50207452

  ----------------INSERT----------------------- Hi MTU - can you check on this part number if there is a BOM or drawing you maybe able to confirm a sensor is available to purchase separately or do we need to order the complete rail / accumulator to ...

• 4000 ECU7 Rail Oil Refill Pressure Sensor Wiring

  The optional oil replenishment system pump pressure sensor is not listed on the standard MTU rail sensor harness schematics. The pin allocations are as follows: Sensor Plug End ADEC End Pin 1 --> Pin 47 Pin 2 --> Pin 70 Pin 3 Blank Pin 4 --> Pin 48

• VM Electronic R750 sensor testing

  VM Electronic R750 sensor testing

• Terex OM934LA Adblue Tank Level & Temp sensor

  Generally for Ad-blue components e.g. doser valves/Ad-Blue injectors and other sensors, to interpret the parts you need the AGS-number which you then input into the EPC system as per the attached presentation.However the Ad-blue tank and sensor are ...

• Vertus / SDMO / Kohler generator set coolant level sensor

  Vertus / SDMO / Kohler generator set coolant level sensor