4000 Marine Bilge Pump

4000 Marine Bilge Pump installation parts

Some engines are equipped with front mounted Bilge Pumps however are not always detailed in the Spare Parts Catalogue. Attached drawing has the required installation parts.

Bilge pump part # 5502003201/87

"Parts for installation (XZ59536000001):

The o-ring for installation in the gear case (position 10 in the drawing) is 700429135000.

And 2x 5562031180 (position 23 in the drawing) for the inlet and exhaust elbow directly at the pump housing"



    • Related Articles

    • Sauer Parts Inquiry

      Sauer compressors require specific information to allow Penske to order parts. Please see the linked related article on literature for an understanding of where the generic literature is held. Attached is a quick knowledge guide which is intended to ...

    • 2000CR Coolant Pump to HP Fuel Pump driver

      LSB 11-23 Issue 4 contains info and part numbers to determine driver type needed depending on various Coolant Pump and HP Fuel Pump versions and configurations.

    • 2000 common rail PTO drive coupling installation instruction

      PTO drive coupling driven off the sea water pump installation instruction.note: confirm coupling type to use correct assembly drawing. Drawing X51625200040 is the current version as at 2017. X00018035 is the former style. 

    • Sauer Compressor Commercial Marine Literature

      Sauer literature is available via the Off Highway Technical Support Team Room (1) and following the link through to the SharePoint for technical documentation (2). Select the Sauer literature folder: Use the quick knowledge guide located in the ...

    • 2000Gx5 coolant pump mount oring - QPE0662010378 - 700429120000

      2000Gx5 coolant pump mount o'ring is typicaly supplied with coolant pump assembly. If pump is removed from whatever reason generaly this o'ring seal maybe OK for reuse if not damaged or perished in anyway however if wanting to replace - below image ...