Detroit 2 Stroke Preservation Fluid

Detroit 2 Stroke Preservation Fluid

As Detroit do not list what exact preservation fluid to use, I would suggest that you follow the MTU Preservation and Represervation Specifications manual as attached. See section 3.2 for a list of approved corrosion inhibitor for internal preservation.

    • Related Articles

    • Re-starting 2 stroke engines after extended storage.

      Penske recommendations for re-starting a Detroit Diesel 2 stroke engine that has been in extended storage would be as follows – Ensure oil level is at correct level and cooling package is topped up with coolant. Remove the rocker covers and ensure ...

    • Fluid Tank Breather and Overflow

      Engineering Bulletin 21.01 has been released detailing the arrangement of a typical Fluid Tank Breather and Overflow. The bulletin is available on the Engineering Bulletins Onedrive - direct link below. ...

    • 2 Stroke Piston identification following supplier CMM measure - W-2021-0002 / other-21/S0012

      -------------INSERT-------------- Sent: Wednesday, 10 May 2023 1:43 AM To: Oats, Lucas <LOats@penske.com.au>; wf_2cycle_p@ps.rolls-royce.com Subject: RE: 8V92 new cylinder kit acceptability Hello Lucas, The parts are good to use. The XXXX out ...

    • Cooling System Preservation

      There is no alternative products that can be used which are not listed in the Preservation and de-preservation manual.  Houghton 9156 is an approved product and still suitable to use in a "unfilled" situation. All P133 products (Glysacorr and ...

    • MTU Preservation Specifications

      Instructions for the preservation and re-preservation of all MTU series engines can be found on the MTU Business portal under Parts & Service, Documents, Technical Documentation. The manual attached (A001070/01E) covers the following,Engines and ...