Dongle reassignment / Dongle lost
The process for DIASYS dongle purchase and replacement has been defined in local service bulletin LSB 19-10, which is available on the Service Information Bulletins PPS folder on OneDrive here: LSB 19-10 Process for applying and extending diasys dongles
Related Articles
Diasys Dongle details check procedure
If needing to verify diasys dongle details for understanding of expiration / validity period / qualification level / details on what modules or systems qualified to access please follow the below process. Please note this detail should also be ...
Customer DiaSys Dongle expired
If a customer dongle level 0 has expired you can renew it with the attached file. Unzip the file and run it while dongle is plugged into the machine.
Customer access DIASYS dongle part number
If you mean a DIASYS dongle then the part number isX00042159. All this kind of information is available in the Technical Documentation - there is a tooling guide published ...
MTU and DDC Electronic Tooling
At the link below you can find the MTU and DDC Electronics tooling guide which has details of dongle numbers, interface hardware part numbers, and software for all electronics tooling for our major franchises. ...
GENSET ES560 10V1600 with ComAp controller fail to start at predelivery
ComAp controller was retrofitted to a GENSET ES560 10V1600 (Originally had a Deep Sea controller). Purpose of retrofit was to enable two gensets to synchronise together of which the Deep Sea controllers were unable to. Symptom:Genset would not start: ...