MTU Onsite Energy S1600 genset parts information

• Related Articles

• What Forms do I need to commission an MTU engine or Onsite Energy generator set?

  MTU forms for Commissioning (for all engine types) can be found on the Business Portal by following this menu tree:Parts & Service / Documents / Forms and then click "Forms for Commissioning".For MTU Onsite Energy sets, there is a Cover Sheet and two ...

• Preheater setpoints for MTU Onsite Energy Gensets

  If a customer wishes to lower the set point of the jacket heaters on MTU OE gensets, for example to lower the base standby load of the installation, then there will normally be a Limit alarm in the ECU that will trigger if the temperature falls too ...

• Coolant for 12V4000 Genset

  Nalco 3477 coolant is approved in A001064 so is OK for a 12V4000G engine. The comment about Light Metals means that in MTU testing the coolant has been found to attack aluminium and other light alloys, therefore if the customer has this in the ...

• MTU Specifications for Liquid Fuels - (Diesel)

  MTU specifications for liquid fuels (Diesel) can be found in the Fluids and Lubricants Specifications manual. Section 5. Liquid Fuels has all of the required information needed when evaluating fuel type and quality for MTU engines. Attached is a copy ...

• Sauer Parts Inquiry

  Sauer compressors require specific information to allow Penske to order parts. Please see the linked related article on literature for an understanding of where the generic literature is held. Attached is a quick knowledge guide which is intended to ...