S60 Marine - Sensor Harness - Plug & Pins.

• Related Articles

• 4-20mA Sensor Signal

  The 4-20mA Sensor adjusts the current output signal proportional to the range of the sensor. The signal is unaffected by EMI, cable length or corroded pins. The 4-20mA signal at the PLC is always the same as that being generated by the sensor, unless ...

• Harness connector, terminals and tooling repair support details for ADEC ECU 7 8 9

  Attached document provides useful part numbers and details for parts and tooling required to repair or maintain ADEC ECU 7, 8 & 9 harnesses.

• 4000 ECU7 Rail Oil Refill Pressure Sensor Wiring

  The optional oil replenishment system pump pressure sensor is not listed on the standard MTU rail sensor harness schematics. The pin allocations are as follows: Sensor Plug End ADEC End Pin 1 --> Pin 47 Pin 2 --> Pin 70 Pin 3 Blank Pin 4 --> Pin 48

• Trouble Shooting Black Smoke on Marine Series 60

  See attached PDF for assistance with trouble shooting black smoke on Marine Series 60. 

• OM LPR terminal harness connectors part numbers ACM MCM MR CPC

  Attached is some available reference material to help decipher terminal and connector part numbers and details for OM LPR engines.