Castrol HLX oil suitable for use in the 16V4000M63L engines

• Related Articles

• Oil Level Sensor Calibration OM936 and monitoring

  Too high or too low engine oil level can lead to serious damage to the engine. Hence, it is important to check it regularly and maintain with appropriate level. There are mainly two methods to check engine oil level. Oil level measurement using oil ...

• Oil consumption as a % of fuel burn

  MTU often calculates oil consumption as a % of fuel burn. For example all the series 4000 engines generally are between 0.3% of fuel burn after 100hrs of operation to 1.0% of fuel burn. To calculate this you will need to start an oil consumption ...

• TSD 20-08 additional unit release - increased oil level for Komatsu 830E & 930E repower engines

  G’day Jim,               Following on your official request of Technical support to review suitability of applying TSD 20-08 to current Komatsu repowering fleets I can confirm comparison of key hardware between our current factory engine supplied ...

• All Engines - Water Pumps - Evaluation of Oil/Water Leaks

  Please see attached Service Information 00/S0024 when evaluating oil or water leaks.

• Fleetguard filter LF3883 not suitable for series 4000 engines

  Fleetguard filter LF3883 is not suitable for use on the Series 4000 engine, see attached note from Fleetguard.The relief valve setting in LF3883 is too low at 27.99 psi this means the filter will go into bypass before the delta p alarm activates. The ...