EDM AIM C&I Application Installation manual

• Related Articles

• EDM Alarm - 317 - Back up Panel Active

  Alarm code 317 in the EDM is for "back up panel active". EDM alarm messages can be found in the Application & Installation Manual - DDEC Bridge Control. See attached.The back up panel is a unit usually incorporated into a level 2 DDEC bridge control ...

• Engine Application – Cyclic Loading

  Background: Many diesel engine applications involve loading/unloading, think an on-highway truck going up and down hilly terrain (see country road), but specific applications are highly cyclic, passenger rail car and transit/city bus are two specific ...

• ADM 3 Control Unit Operators Manual

  ADM 3 Control Unit Operators Manual installation information, parameter information, fault code information.

• “Geislinger isolated Flywheel installation tensions” for part number X52725500009

  Please see below and attached details for Geislinger isolated Flywheel installation tensions. Please also ensure following - - if replacing steel flexplate ensure alternator suits and has clearance for this coupling version. - if replacing steel ...

• DDEC IV EDM connection recommendations and possible corruption with DDDL use

  EDM (standard Detroit Electonic Display Module) as designed for he DDEC system is wired into the 900/901 can bus (which is J1587 data link) it can 'drop out' when DDDL (diagnostic tooling) is connected into the same link etc...our recommendations are ...