Incorrect live oil sample point location
In the attached document shows the unfiltered and filtered oil galleries in the block. Alternate sample port is the upper plug on the right hand side at the rear of the block, as per below.
Related Articles
Live oil sampling kit options
For customer requesting live oil sampling on their 4000CXX engines, Penske Power Systems have now released two kits for engine oil live sampling. One kit P/N - LIVESAM.OTH is designed for the 4000CXX engines with spin on filters while P/N - LIVESAM ...
Oil Level Sensor Calibration OM936 and monitoring
Too high or too low engine oil level can lead to serious damage to the engine. Hence, it is important to check it regularly and maintain with appropriate level. There are mainly two methods to check engine oil level. Oil level measurement using oil ...
HB800 Coolant make up for oil sample analysis
Please find attached a virgin sample of HB800 Coolant, showing chemical levels etc.
Oil consumption as a % of fuel burn
MTU often calculates oil consumption as a % of fuel burn. For example all the series 4000 engines generally are between 0.3% of fuel burn after 100hrs of operation to 1.0% of fuel burn. To calculate this you will need to start an oil consumption ...
Oil level increase 16V4000-01 - dipstick
TSD 20-08 available in onedrive provides advice for abaility to increase running oil level for 16v4000-01 engines in Hitachi AC3 installations and possibly others. This another continuous improvement MTU and Penske has worked on to enable some ...