MTU 16/20V Engine crankcase pressure check procedure
Due to a high number of unreliable crankcase pressure sensors on the 16V and 20V series 4000 engines a checking procedure has been developed to assist tech's in testing the sensor before installation.Attached is the testing procedure.
Related Articles
MTU Specifications for Liquid Fuels - (Diesel)
MTU specifications for liquid fuels (Diesel) can be found in the Fluids and Lubricants Specifications manual. Section 5. Liquid Fuels has all of the required information needed when evaluating fuel type and quality for MTU engines. Attached is a ...
Engine Application – Cyclic Loading
Background: Many diesel engine applications involve loading/unloading, think an on-highway truck going up and down hilly terrain (see country road), but specific applications are highly cyclic, passenger rail car and transit/city bus are two specific ...
Sound Data Required To Calculate Engine Attenuation
Description The purpose of to this bulletin is to guide technical staff in compiling the necessary technical information required for the accurate design of acoustic control equipment for the attenuation of engine surface and exhaust noise. ...
Reman OM engine aftertreatment commisioning.
I.There is a requirement for Reman OM engines with aftertreatment systems sold through Penske AUNZ to have the aftertreatment system commissioned by RRPS / MTU. This is completed via VDOK and links to the new reman engines serial number to the ACM, ...
Penske Crankcase Liner fretting corrosion wear reclamation inserts vs stage liner
With the release of MTU engine series typically MTU make available procedures and parts for reclamation of major components to enable repairs or reuse of items. These are typically published within relative service and parts literature available to ...