MTU Preservation Specifications

MTU Preservation Specifications

Instructions for the preservation and re-preservation of all MTU series engines can be found on the MTU Business portal under Parts & Service, Documents, Technical Documentation. The manual attached (A001070/01E) covers the following,Engines and engine-generator set– Diesel engines – all MTU series– Gas engines – MTU Series 4000– Diesel engine-generator sets with MTU engines of Series 1600, 2000, 4000 – Gas engine-generator sets with MTU engines of Series 400 and 4000

    • Related Articles

    • MTU Specifications for Liquid Fuels - (Diesel)

      MTU specifications for liquid fuels (Diesel) can be found in the Fluids and Lubricants Specifications manual.  Section 5. Liquid Fuels has all of the required information needed when evaluating fuel type and quality for MTU engines.  Attached is a ...

    • Cooling System Preservation

      There is no alternative products that can be used which are not listed in the Preservation and de-preservation manual.  Houghton 9156 is an approved product and still suitable to use in a "unfilled" situation. All P133 products (Glysacorr and ...

    • Detroit 2 Stroke Preservation Fluid

      As Detroit do not list what exact preservation fluid to use, I would suggest that you follow the MTU Preservation and Represervation Specifications manual as attached. See section 3.2 for a list of approved corrosion inhibitor for internal ...

    • new engine Run-In initial oil Daimler / OM and MTU LPR

      Daimler manufactered engines ie. OM legacy & MTU LPR models are typically supplied new from factory with oil already providing preservation benefit and is considered suitable as an initial "Run In" oil capable to 1st scheduled service event. Below ...

    • Preheater setpoints for MTU Onsite Energy Gensets

      If a customer wishes to lower the set point of the jacket heaters on MTU OE gensets, for example to lower the base standby load of the installation, then there will normally be a Limit alarm in the ECU that will trigger if the temperature falls too ...