Oil level increase 16V4000-01 - dipstick
TSD 20-08 available in onedrive provides advice for abaility to increase running oil level for 16v4000-01 engines in Hitachi AC3 installations and possibly others. This another continuous improvement MTU and Penske has worked on to enable some customers to reliably increase their oil change intervals.
Related Articles
TSD 20-08 additional unit release - increased oil level for Komatsu 830E & 930E repower engines
G’day Jim, Following on your official request of Technical support to review suitability of applying TSD 20-08 to current Komatsu repowering fleets I can confirm comparison of key hardware between our current factory engine supplied ...
Oil Level Sensor Calibration OM936 and monitoring
Too high or too low engine oil level can lead to serious damage to the engine. Hence, it is important to check it regularly and maintain with appropriate level. There are mainly two methods to check engine oil level. Oil level measurement using oil ...
Connection of service tool to MM7 Controller
In order to make configuration changes to the MM7 controller a service tool needs to be connected , the correct drivers to use for this are located at the following link Software & drivers (vandaele-power.be) You will need to download and install ...
MTU oil level monitoring, regulating and replenishment level managment system
MTU offers a mechanical optional system that can provided at new engine supply :- - oil level monitoring only. - oil level monitoring, regulation and replenishment system. This version maybe found on many 4000 and 2000 installations including Marine, ...
DEIF service code reset
ResetCode for maintenance Alarm is"2002" The maintenance alarm you are seeing is one of twopossible standard 'maintenance' timers in the DEIF controller. It is normallyset for 365 days (alarm 1) or 500 hours running (alarm 2). It can beturned off if ...