Replacement of battery chargers on Series 60 Generators
The replacement Charger for this application is a CPLH1224, 12 AMP 24 VLT Charger.As an Optionyou can also fit a boost timer bt12-24r1 or btlh12-24r1 for boost function and fault display on door of the enclosure.I have attached data sheets for all of the above information or refer to link below.http://bolec.com.au/product/cp1224lh-24v-12a-with-lo-hi-volt-alarms/
Related Articles
Replacement Details for MMC Touch Screens on 400 and 4000 series gas generators
The part number for the replacement of touchscreens for the MMC on the 400 and 4000 series gas generators due to the original manufacturer no longer being able to supply these items. Check attached documents for part numbers and instructions for ...
Trouble Shooting Black Smoke on Marine Series 60
See attached PDF for assistance with trouble shooting black smoke on Marine Series 60.
IPC display replacement
Please follow the attached documents if you have to replace the IPC display. Start with the SIB 4000Gas-17/S0017.
Series 60 Marine Tune up Specs
Series 60 Marine injector height setting can vary between 81mm and 82.1mm and is sometimes unclear if the label is not on the engine. This is to clarify specification per model. Refer Marine Manual MS25056. All S60 HK30-HK39, the intake valve lash ...
Series 4000_02_03 HPFP drive dog replacement part
The High Pressure Fuel Pumps on the 4000-02/03 engine now have the drive dog listed and stocked as a seperate part. If damage or failure of the drive dog occurs it can simply be replaced rather than replacing the entire HPFP. The new part number is ...