Replacement Details for MMC Touch Screens on 400 and 4000 series gas generators
The part number for the replacement of touchscreens for the MMC on the 400 and 4000 series gas generators due to the original manufacturer no longer being able to supply these items. Check attached documents for part numbers and instructions for these replacements.
Related Articles
Time Clock out of sequence on New MTU Gas MMC Controllers
There have been issues with the IPC touch screen on the MTU GAs engines in particular when a replacement touchscreen has been ordered from the factory.MTU OEG has informed that there is a windows function which synchronizes time with a timeserver, ...
S4000L61/62 Gas: Failures of Tecjet and diagnosing
It has been established that Tec jet components on S4000L61/62 Gas engines have a higher-than-expected failure rate. Branches supporting these installations should review their Tec jet stock levels and consider approaching customers to replace the ...
Replacement of battery chargers on Series 60 Generators
The replacement Charger for this application is a CPLH1224, 12 AMP 24 VLT Charger.As an Optionyou can also fit a boost timer bt12-24r1 or btlh12-24r1 for boost function and fault display on door of the enclosure.I have attached data sheets for all of ...
IPC display replacement
Please follow the attached documents if you have to replace the IPC display. Start with the SIB 4000Gas-17/S0017.
FW: Bellevue Gas Mixture starting issue.
Have discussed this with MTU, the best way forward will be to make sure the tune from 0-40% load is richer as per the MTU map around 450 PPM this will give a better response to leaner gas at idle without comprimising the engine and will also be ok in ...