Starting Problems and Overspeed Shutdown 1600 series Generator with deep Sea Controller

• Related Articles

• Assistance Required with Configuration of DIEF Controller

  Assistance required with configuration of the Dief Controller to allow for single unit operation with no main and circuit breaker control

• Code SM262 on Series 400 Gas and CD200 ignition controller troubleshooting

  Check through the attached ignition controller manual.Also check cranking speed, this fault can occur if the speed is not high enough to give the controller the signal it expects: we should be seeing close to 200RPM.  If we don't make that then check ...

• Series 60 Marine maintenance schedule

  Series 60 Marine operator manual with maintenance schedule

• Deutz DPS13DF under voltage shutdown

  Please refer to the attached documents to solve the problem.

• Series 60 Marine Tune up Specs

  Series 60 Marine injector height setting can vary between 81mm and 82.1mm and is sometimes unclear if the label is not on the engine. This is to clarify specification per model.  Refer Marine Manual MS25056. All S60 HK30-HK39, the intake valve lash ...