Xentry XD4IMO - OM MB diagnostic tool

• Related Articles

• Erasing Emmision fault error codes - OM / LPR engines

  Please find attached details to errase any emmision related fault codes that maybe logged within any OM emmision regulated engines - you are requird to access with Xentry to obtain necessary random codes and details to correspond then with the ...

• How to find aftertreatment part numbers for OM series engines.

  Attached is the procedure for finding aftertreatment parts for OM series engines. If you only have the engine serial number, you'll need the "virtual VIN" which can be found by putting the engine serial number into the MTU Business Portal. See the ...

• Reman OM engine aftertreatment commisioning.

  I.There is a requirement for Reman OM engines with aftertreatment systems sold through Penske AUNZ to have the aftertreatment system commissioned by RRPS / MTU. This is completed via VDOK and links to the new reman engines serial number to the ACM, ...

• Off highway application - Mercedes Classic OM Engine - OFF Engine wire harness for ADM/CPC/MR/PLD

  All XENTRY users, Attached is a drawing for an off the engine wire harness for testing of components(ADM/CPC/MR/PLD), programming(ADM/CPC) & XENTRY operation validation for the Mercedes classic OM engine range that utilise the ADM2/3 and CPC4-ECAN ...

• Connection of service tool to MM7 Controller

  In order to make configuration changes to the MM7 controller a service tool needs to be connected , the correct drivers to use for this are located at the following link Software & drivers (vandaele-power.be) You will need to download and install ...