How to find aftertreatment part numbers for OM series engines.

How to find aftertreatment part numbers for OM series engines.

Attached is the procedure for finding aftertreatment parts for OM series engines.
If you only have the engine serial number, you'll need the "virtual VIN" which can be found by putting the engine serial number into the MTU Business Portal.

See the two attached files here.

    • Related Articles

    • OM / LPR Engine SCR Emissions Certification Downgrade - updated 20/01/23

      UPDATE - MTU & Daimler have ceased ability to perform any in field downgrade of emmisions as per attached letter 20210511 - dated 7th May 2021 - summary extracted below. ------------INSERT----------- ---------END INSERT-------------- Historical ...

    • OM / Mercedes / LPR Tiemec terminal and connector parts listing - ADM / PLD-MR

      Attached is factory parts lising deails for terminals and connectors typically used on LPR Legacy OM engines with ADM / PLD-MR.

    • Reman OM engine aftertreatment commisioning.

      I.There is a requirement for Reman OM engines with aftertreatment systems sold through Penske AUNZ to have the aftertreatment system commissioned by RRPS / MTU. This is completed via VDOK and links to the new reman engines serial number to the ACM, ...

    • Sauer Parts Inquiry

      Sauer compressors require specific information to allow Penske to order parts. Please see the linked related article on literature for an understanding of where the generic literature is held. Attached is a quick knowledge guide which is intended to ...

    • Erasing Emmision fault error codes - OM / LPR engines

      Please find attached details to errase any emmision related fault codes that maybe logged within any OM emmision regulated engines - you are requird to access with Xentry to obtain necessary random codes and details to correspond then with the ...