EIAPP Certificates

EIAPP Certificates

Process and pricing structure established for Sales service products via MTU Asia E.g., EIAPP + Technical File requests and Parameter/calibration changes – E-2020-07-01/02 revision 2.

When referencing MTU published priced lists. An agreed mark up from MTU Asia has been established determined by invoice total. Refer table below which will enable branches to confidently quote customers.

 


Attached is E-2020-07-01/02 revision 2 for further reference. 

    • Related Articles

    • EIAPP CERTIFICATE

      The EIAPP Certificates are not available on the business portal. Could you please ask the vessel owners to check if they are onboard the vessel as there is a cost from MTU in requesting replacements. Attachedare required request forms for applying ...

    • Xentry XD4IMO - OM MB diagnostic tool

      Please refer to latest release of LSB 15-07 available in our onedrive for relevant and updated details available for Xentry . LSB 15-07 Selling XD4IMO.pdf

    • Sauer Parts Inquiry

      Sauer compressors require specific information to allow Penske to order parts. Please see the linked related article on literature for an understanding of where the generic literature is held. Attached is a quick knowledge guide which is intended to ...

    • What Forms do I need to commission an MTU engine or Onsite Energy generator set?

      MTU forms for Commissioning (for all engine types) can be found on the Business Portal by following this menu tree:Parts & Service / Documents / Forms and then click "Forms for Commissioning".For MTU Onsite Energy sets, there is a Cover Sheet and two ...

    • Summary of Material Standards & Surface Finish Standard for drawings

      Every drawing created within the Penske Engineering department should state the material required for every part requiring fabrication on the drawing. The AS/NZS of the material should be stated in the notes of the drawing so the ...