OM470_471_473.9 Tune up procedure

• Related Articles

• Reman OM engine aftertreatment commisioning.

  I.There is a requirement for Reman OM engines with aftertreatment systems sold through Penske AUNZ to have the aftertreatment system commissioned by RRPS / MTU. This is completed via VDOK and links to the new reman engines serial number to the ACM, ...

• How to find aftertreatment part numbers for OM series engines.

  Attached is the procedure for finding aftertreatment parts for OM series engines. If you only have the engine serial number, you'll need the "virtual VIN" which can be found by putting the engine serial number into the MTU Business Portal. See the ...

• Erasing Emmision fault error codes - OM / LPR engines

  Please find attached details to errase any emmision related fault codes that maybe logged within any OM emmision regulated engines - you are requird to access with Xentry to obtain necessary random codes and details to correspond then with the ...

• Series 60 Marine Tune up Specs

  Series 60 Marine injector height setting can vary between 81mm and 82.1mm and is sometimes unclear if the label is not on the engine. This is to clarify specification per model.  Refer Marine Manual MS25056. All S60 HK30-HK39, the intake valve lash ...

• OM / LPR Engine SCR Emissions Certification Downgrade - updated 20/01/23

  UPDATE - MTU & Daimler have ceased ability to perform any in field downgrade of emmisions as per attached letter 20210511 - dated 7th May 2021 - summary extracted below. ------------INSERT----------- ---------END INSERT-------------- Historical ...