dual speed limit needed for OM926 / Franna Crane

• Related Articles

• How to find aftertreatment part numbers for OM series engines.

  Attached is the procedure for finding aftertreatment parts for OM series engines. If you only have the engine serial number, you'll need the "virtual VIN" which can be found by putting the engine serial number into the MTU Business Portal. See the ...

• Technicians Guide OM Series Engine Control System

  Technicians Guide OM Series Engine Control System

• MTU BVNG - Idle Speed Increase Button

  Please find attached drawing of the optional “Increase Idle Speed” function.  A 2 core cable will need to be run from the control station button to each LOP in the engine room on plug X34, pins 3 & 11. Also pins 4 & 12 will need to be looped out as ...

• OM / LPR Engine SCR Emissions Certification Downgrade - updated 20/01/23

  UPDATE - MTU & Daimler have ceased ability to perform any in field downgrade of emmisions as per attached letter 20210511 - dated 7th May 2021 - summary extracted below. ------------INSERT----------- ---------END INSERT-------------- Historical ...

• Reman OM engine aftertreatment commisioning.

  I.There is a requirement for Reman OM engines with aftertreatment systems sold through Penske AUNZ to have the aftertreatment system commissioned by RRPS / MTU. This is completed via VDOK and links to the new reman engines serial number to the ACM, ...