Wet Stacking / Slobbering / Light Load operation and effects 14-S0230

• Related Articles

• All Engines - Water Pumps - Evaluation of Oil/Water Leaks

  Please see attached Service Information 00/S0024 when evaluating oil or water leaks.

• TSD 20-08 additional unit release - increased oil level for Komatsu 830E & 930E repower engines

  G’day Jim,               Following on your official request of Technical support to review suitability of applying TSD 20-08 to current Komatsu repowering fleets I can confirm comparison of key hardware between our current factory engine supplied ...

• Oil consumption as a % of fuel burn

  MTU often calculates oil consumption as a % of fuel burn. For example all the series 4000 engines generally are between 0.3% of fuel burn after 100hrs of operation to 1.0% of fuel burn. To calculate this you will need to start an oil consumption ...

• Oil Level Sensor Calibration OM936 and monitoring

  Too high or too low engine oil level can lead to serious damage to the engine. Hence, it is important to check it regularly and maintain with appropriate level. There are mainly two methods to check engine oil level. Oil level measurement using oil ...

• Castrol HLX oil suitable for use in the 16V4000M63L engines

  The Castrol HLX is approved for the use in 4000-03 model engines as a Single-grade Category 2 SAE 30 and 40 oil.For further details please refer to the Fluids and Lubes Specifications document.